C and U Purlin Forming Machines
Basic Info
Model No.: RF-CU
Product Description
Model NO.: RF-CU Place of Orgin: Wuxi, China Control System: PLC Panasonic Roller Stations: 17 Stations Hydraulic Cutting Station: 15kw Machine Weight: 12tons Specification: CE, SGS, ISO HS Code: 8455229090 Name: C and U Purlin Forming Machines Material Thickenss: 0.4-0.6mm Forming Speed: 20m/Min Main Motor Power: 22kw Machine Size: 11.3mx2.2mx1.2m Trademark: SUHANG Origin: Wuxi, China C and U Purlin Forming Machine
Technical Parameter:
1. The specification of the rolling production (mm): 80-300× L (see appendix 1)
2. The speed of the rolling Line: 20M/min
3. The number of the roller: 17 stations
4. The material of the roller: Use the excellent hammered steel Cr15 to be quenched as a whole, then to process by numerical control.
5. The material of the principal axis: Use the excellent steel No. 45 to process.
6. The power of the principal electric motor: 22kW
7. Hydrodynamic station cut: 15kW
8. Drive-wire system: The whole machine uses the PLC industrial computer to control by frequency conversion.
9. The size of the shape equipment: 11.3× 2.2× 1.2 (see the appendix 2)
10. The gross weight of the equipment: 12 T
11. Accessories: One set of the stacking shelf, one set of leveling mechanism, one set of punching and cutting mechanism, one set of hydrodynamic station, one set of computer control system (Panasonic programmable PLC, touchable display screen, a series of Panasonic transducers, and OMRON encoder) a set of material shelf.
Contact us if you need more details on C and U Purlin Forming Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Cu Purlin Roll Forming Machine、Cu Purlin Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.
Technical Parameter:
1. The specification of the rolling production (mm): 80-300× L (see appendix 1)
2. The speed of the rolling Line: 20M/min
3. The number of the roller: 17 stations
4. The material of the roller: Use the excellent hammered steel Cr15 to be quenched as a whole, then to process by numerical control.
5. The material of the principal axis: Use the excellent steel No. 45 to process.
6. The power of the principal electric motor: 22kW
7. Hydrodynamic station cut: 15kW
8. Drive-wire system: The whole machine uses the PLC industrial computer to control by frequency conversion.
9. The size of the shape equipment: 11.3× 2.2× 1.2 (see the appendix 2)
10. The gross weight of the equipment: 12 T
11. Accessories: One set of the stacking shelf, one set of leveling mechanism, one set of punching and cutting mechanism, one set of hydrodynamic station, one set of computer control system (Panasonic programmable PLC, touchable display screen, a series of Panasonic transducers, and OMRON encoder) a set of material shelf.
| 5T hydraulic Uncoiler | 1 set |
| Main roll forming machine | 1 set |
| Control box | 1 unit |
| Hydraulic station | 1 unit |
| Out table 500mm | 2 units |
Product Categories : Wall and Roof Panel Roll Forming Machine
Other Products
Hot Products
Aluminium Gutter Roll Forming MachineHigh Strength Steel Deck Floor Roll Forming MachineCustomized Hex head self drilling screw with rubber wisher from manufacturerFoam EPS sandwich panelCheap cold rolled pre-panited galvalume /PPGL steel heat insulation roof panelHydraulic Press Brake bending machinelength measuring cutting machineChinese manufacturers steel hydraulic uncoilerMading in China Cold rolled steel coil Simple Slitting machineCustomized Embossing Machinesteel C purlins steel roll forming machinesteel and PPGI embossding machinePPGI glazed tile roll forming machine WILLING CompanyConstruction Floor Decking Cold Roll Forming Machinetrapezoidal sheet roof tile wall panel roll forming machine hot in indiansteel Profile roof forming machine